User Manual
OTASP Activation:
Before this can be achieved you need both a working account and an activated device in that the
Opengear's ESN (Electronic Serial Number) needs to be registered with an appropriate plan on your
Carriers account
1. Select Internal Cellular Modem panel on the System > Dial menu
2. A particular phone number needs to be dialed to complete OTASP e.g. Verizon uses *22899, Telus
uses *22886
3. Click Activate to initiate the OTASP call. The process is successful if no errors are displayed and you
no longer see the CDMA Modem Activation form. If OTASP is unsuccessful you can consult the
System Logs for clues to what went wrong at Status > Syslog
4. When OTASP has completed, enable the Internal Cellular Modem by entering the carriers phone
number (which defaults to #777) and clicking Apply
5. The Cellular statistics page on Status > Statistics displays the current state of the modem
6. OTASP success results in a valid phone number placed in the NAM Profile Account MDN field
Manual Activation:
Some carriers may not support OTASP in which case it may be necessary to manually provision the
modem.
1. Select Internal Cellular Modem panel on the System > Dial menu
To Next Page
Loading...
Need help?
General
