21
Model 72 User Manual - OPEX Corporation
Figure 12: Operator Main Menu screen (example)
7 Use the arrow buttons to navigate to SELECT JOB and press the ENTER
button. The Select Job screen appears (Figure 13).
Figure 13: Select Job screen
8 Use the Arrow buttons to choose a job, and press Enter to select it. Based
on the job settings, you may have additional information that appears on
the screen, as in this example:
Figure 14: Set Side Cutter position screen
9 Perform the tasks requested on screen to properly set up the job.
Note: The side and top cutter on the Model 72 are operator-adjustable.
Wednesday, March 3, 2010 10:34 A.M.
OPERATOR: PAT
JOB: NEW
SELECT JOB PASSWORD STATISTICS
SELECT JOB
AMEX CREDIT MCARD
VISA
ADJUST CUTTER DEPTH
Push the cycle button when ready.
SIDE CUTTER = POSITION 1
TOP CUTTER = POSITION 1
To Next Page
Loading...