2 Operating the System
2-16 AS-Series Operator Manual August 2010
Preview/Zoom windows
The Preview window provides a large image of a scanned document. View an image in
the Preview window by selecting its thumbnail.
Touch the image in the Preview window to open the Zoom screen, where you can
enlarge or reduce the image and view any associated snippets.
NOTE: Touch the screen at another center point to re-center the zoom. You can
re-center the zoom before or after enlarging or reducing the image.
FIGURE 7: Zoom screen
The
Zoom In and Zoom Out buttons enlarge and reduce the image in the Zoom screen.
Re-center the zoom by touching the new center on the monitor or use the mouse. You can
also use the + and - keys on the keyboard to zoom in and out.
Use the
Ruler function to measure distance from one place to another on the image. Use the
mouse to click the Ruler button, then click and hold the left mouse button on one location while
you drag the cursor to the other location. Notice that as you move the cursor from place to
place, its exact position is indicated in the field as noted in Figure 7.
Display the designated scan area for the OCR lines.
Make this image the
Default for this page type.
View any Snippets associated with the image. The snippets the system captures are set up in
the Page Type Parameters.
Close the Zoom window.
To Next Page
Loading...
