2 Operating the System
2-22 AS-Series Operator Manual August 2010
aligned as long as the lead sheet is the top sheet. Review these techniques with
your AS-Series Administrator or your OPEX Technician or Sales Engineer.
• The Drag Finger can be used to help create drag on paper larger then 8" wide. This
helps prevent pages from skewing when positioned in front of the feeder. This
flexible piece of rubber will improve performance when feeding packets of paper.
The finger can also be depressed to move it out of the paper path, if necessary.
• Checks and remits should be dropped in the same orientation as if you were
reading them. Other landscape pages can also be automatically detected if their
page width or height is unique.
To Next Page
Loading...
