2 Operating the System
2-30 AS-Series Operator Manual August 2010
Using Batch Editor to fix incomplete batches
If there is a problem with the machine and/or CertainScan does not close properly
during a run, a batch may not be closed and saved properly. If this is the case, the
operator will be notified that a temporary batch file exists when restarting Certain-
Scan, and that only an operator with a ManagerLevel account or an OPEX technician
can fix the problem.
FIGURE 20: Incomplete batch notification
Consult your AS-Series Administrator if you receive this error message.
To Next Page
Loading...
