Transponder which you want to use, then press OK to confirm the setting.
Add
Here you can input new Transponder frequency, choose polarization (Vertical,
Horizontal), input new Symbol rate, and choose FEC: 1/2, 2/3, 3/4, 6/5, 7/8, Auto .
Press OK to confirm the settings, and this new Transponder will be added to the TP
list in ascending order sorted by frequency.
Delete
You can delete the Transponder of the Satellite. Select the Transponder that you
want to delete from the TP list. You will be asked to confirm whether delete the
Transponder or not. If you select YES, all the channels in the selected Transponder
will be deleted. Press OK key, and the selected Transponder will be deleted.
Edit
In this menu, you can press the CH+/CH- keys choose the Transponder which you
want to Edit, press OK to confirm. Here you can change the Transponder frequency,
polarization (Ver, Hor), symbol rate and FEC, then press OK to confirm your new
settings.
4.2.3 Search Channels from Satellite
A: Satellite Search
1. Highlight the Satellite position and press the OK button to enter satellite list.
Select one satellite you want to search.
2. Complete the antenna settings of this satellite.
3. Highlight the Start Search and select satellite then press the OK button to
confirm.
B: Multi Satellites Search
1. Highlight the Start Search and select Multi-sat then press the OK button.
2. Highlight the satellites in the satellite list, but make sure they are all configured to
To Next Page
Loading...
