Safety
Version 1.0.2 dated 2018-03-02 Page 5Translation of the original instructions
DH45V GB
DH45V_GB_1.fm
OPTIMUM
MASCHINEN - GERMANY
®
1 Safety
Glossary of symbols
This part of the operating instructions
explains the meaning and use of the warning notes included in these operating instructions,
defines the intended use of the geared drill,
points out the dangers that might arise for you or others if these instructions are not
observed,
informs you about how to avoid dangers.
In addition to these operation instructions, please observe
the applicable laws and regulations,
the statutory provisions for accident prevention,
the prohibition, warning and mandatory signs as well as the warning notes on the geared
drill.
Always keep this documentation close to the geared drill.
1.1 Type plate
INFORMATION
If you are unable to rectify an issue using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D-96103 Hallstadt, Germany
Email: info@optimum-maschinen.de
provides further instructions
calls on you to act
listings
To Next Page
Loading...
