Version 1.0.2 dated 2018-03-02 Page 2 Translation of the original instructions
DH45VGB
OPTIMUM
MASCHINEN - GERMANY
®
Inhaltsverzeichnis
1 Safety
1.1 Type plate...................................................................................................................................................... 5
1.2 Safety instructions (warning notes)................................................................................................................ 6
1.2.1 Classification of hazards .................................................................................................................. 6
1.2.2 Other pictograms.............................................................................................................................. 6
1.3 Intended use .................................................................................................................................................. 7
1.4 Reasonably foreseeable misuse.................................................................................................................... 8
1.4.1 Avoiding misuse............................................................................................................................... 8
1.5 Possible dangers caused by the geared drill ................................................................................................. 9
1.6 Qualification of personnel ............................................................................................................................ 11
1.6.1 Target group................................................................................................................................... 11
1.6.2 Authorized persons ........................................................................................................................ 11
1.7 User positions .............................................................................................................................................. 12
1.8 Safety measures during operation............................................................................................................... 12
1.9 Safety devices ............................................................................................................................................. 13
1.10 Safety check ................................................................................................................................................ 13
1.11 Emergency stop button................................................................................................................................ 14
1.11.1 Master switch ................................................................................................................................. 14
1.11.2 Drill chuck guard ............................................................................................................................ 14
1.12 Personal protective equipment .................................................................................................................... 15
1.13 Safety during operation................................................................................................................................ 15
1.14 Safety during maintenance.......................................................................................................................... 15
1.14.1 Disconnecting and securing the geared drill .................................................................................. 16
1.15 Using lifting equipment ................................................................................................................................ 16
1.15.1 Mechanical maintenance ............................................................................................................... 16
1.16 Accident report............................................................................................................................................. 16
1.17 Electronics ................................................................................................................................................... 16
1.18 Inspection deadlines.................................................................................................................................... 17
2 Technical specification
2.1 Emissions .................................................................................................................................................... 19
2.2 Dimensions .................................................................................................................................................. 21
3 Delivery, internal transport, unpacking
3.1 Delivery........................................................................................................................................................ 22
3.2 Interdepartmental transport ......................................................................................................................... 22
3.3 Unpacking.................................................................................................................................................... 23
3.4 Lifting the machine....................................................................................................................................... 23
3.5 Installation requirements.............................................................................................................................. 24
3.5.1 Foundation and ground .................................................................................................................. 24
3.6 Fixing ........................................................................................................................................................... 24
3.6.1 Assembly drawing .......................................................................................................................... 25
3.7 Lubrication ................................................................................................................................................... 25
3.7.1 Gear ............................................................................................................................................... 26
3.7.2 Coolant equipment......................................................................................................................... 26
3.8 First commissioning ..................................................................................................................................... 26
3.8.1 Connecting the optional foot switch ............................................................................................... 27
3.8.2 Warming up the machine ............................................................................................................... 27
3.9 Electrical connection.................................................................................................................................... 27
0.0.1 Regulated drives in connection with residual current devices........................................................ 29
0.0.2 Protection from Dangerous Shock Currents, use of ELCBs .......................................................... 29
0.0.3 Current in the protective earth conductor - Leakage current.......................................................... 29
0.0.4 When the ELCB triggers ................................................................................................................ 30
1Operation
1.1 Control and indicating elements .................................................................................................................. 31
1.2 Control panel ............................................................................................................................................... 32
1.3 Tapping / drilling mode ................................................................................................................................ 33
To Next Page
Loading...
