Maintenance
Version 1.0.2 dated 2018-03-02 Page 45Translation of the original instructions
DH45V GB
DH45V_GB_6.fm
OPTIMUM
MASCHINEN - GERMANY
®
INFORMATION
The spindle bearing is lifetime-lubricated. It is not necessary to lubricate it again.
3.3 Repair
3.3.1 Customer service technician
For any repair work request the assistance of an authorised customer service technician. Con-
tact your specialist dealer if you do not have customer service's information or contact Stürmer
Maschinen GmbH in Germany who can provide you with a specialist dealer's contact informa
-
tion. Optionally, the
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
can provide a customer service technician, however, the request for a customer service techni-
cian can only be made via your specialist dealer.
If the repairs are carried out by qualified technical personnel, they must follow the indications
given in these operating instructions.
Optimum Maschinen Germany GmbH accepts no liability nor does it guarantee against damage
and operating malfunctions resulting from failure to observe these operating instructions.
For repairs, only use
faultless and suitable tools only,
original parts or parts from series expressly authorised by Optimum Maschinen Germany
GmbH.
as required
Spindle return spring
Readjusting
ATTENTION!
Parts may fly off at high speed. When disassembling
the key housing, please make sure that the machine
is only maintained and prepared by qualified staff.
Interval Where? What? How?
To Next Page
Loading...
