Optimum OPTimill F 150 User Manual

OPTIMUM
MASCHINEN - GERMANY
Appendix
Version 1.1.6 dated 2014-10-16Page 154 Original operating instructions
F150GB
13 Appendix
13.1 Copyright
Optimum Maschinen Germany GmbH
This document is copyright. All derived rights are reserved, especially those of translation, re-
printing, use of figures, broadcast, reproduction by photo-mechanical or similar means and
recording in data processing systems, either partial or total.
13.2 Changes
Any changes in the construction, equipment and accessories are reserved for reasons of
enhancement. Therefore, no claims may be derived from the indications and descriptions.
Errors excepted!
13.3 Product follow-up
We are required to perform a follow-up service for our products which extends beyond ship-
ment.
We would be grateful if you could send us the following information:
 Modified settings
 Any experiences with the CNC machine which might be important for other users
 Recurring failures
 Difficulties with the documentation
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Email: info@optimum-maschinen.de

Optimum OPTimill F 150 Specifications

General

Brand	Optimum
Model	OPTimill F 150
Category	Power Tool
Language	English