OPTIMUM
MASCHINEN - GERMANY
Safety
Version 1.1.6 dated 2014-10-16 Page 7Original operating instructions
F150 GB
1 Safety
This part of the operating instructions
explains the meaning and use of the warning notices included in these operating instruc-
tions,
defines the intended use of the CNC machine,
points out the dangers that might arise for you or others if these instructions are not
observed,
informs you about how to avoid dangers.
In addition to these operation instructions, please observe
the applicable laws and regulations,
the legal regulations for accident prevention,
the prohibition, warning and mandatory signs as well as the warning labels on the CNC
machine.
Always keep this documentation close to the CNC machine.
1.1 Glossary of symbols
provides further instructions
calls on you to act
enumerations
1.2 Safety instructions (warning notes)
1.2.1 Classification of hazards
We classify the safety warnings into various levels. The table below gives an overview of the
classification of symbols (ideogram) and the warning signs for each specific danger and its
(possible) consequences.
Symbol Warning alert Definition / consequence
DANGER!
Impending danger that will cause serious injury or death to people.
WARNING!
A danger that might cause severe injury to the personnel or can lead to
death.
CAUTION!
Danger or unsafe procedure that might cause injury to people or damage to
property.
ATTENTION!
Situation that could cause damage to the CNC machine and product and
other types of damage.
No risk of injury to people.
INFORMATION
Application tips and other important or useful information and notes.
No dangerous or harmful consequences for people or objects.
To Next Page
Loading...
Need help?
General
