Optimum OPTimill F 150 User Manual

OPTIMUM
MASCHINEN - GERMANY
Operation
Version 1.1.6 dated 2014-10-16 Page 71Original operating instructions
F150 GB
6 Operation
6.1 Safety
Commission the CNC machine only under the following conditions:
 The CNC machine is in proper working order.
 The CNC machine is used as prescribed.
 The operating manual is followed.
 All safety devices are installed and activated.
All failures should be eliminated immediately. Stop the CNC machine immediately in the event
of any abnormality in operation and make sure it cannot be started up accidentally or without
authorisation. Notify the person responsible immediately of any modification.
 "Safety during operation“ on page 17
6.2 Control and indicating elements
Img.6-1: F150
4
5
1
2
6
8
9
10
7
13
3
11
12

Optimum OPTimill F 150 Specifications

General

Brand	Optimum
Model	OPTimill F 150
Category	Power Tool
Language	English