OPTIMUM
MASCHINEN - GERMANY
Assembly and commissioning
Version 1.1.6 dated 2014-10-16Page 30 Original operating instructions
F150GB
3.5 Installation plan F150
Img.3-1: Installation plan
3.6 Requirements regarding the installation site
Organize the working area around the CNC machine according to the local safety regulations.
The working area for operating, maintenance and repair must not be hindered. Follow the pre-
scribed safety areas and escape routes according to VDE 0100 part 729 as well as the environ-
mental conditions for the operation of the CNC machine.
INFORMATION
The mains plug of the CNC machine must be freely accessible.
To Next Page
Loading...
Need help?
General
