OPTIMUM
MASCHINEN - GERMANY
8.8 EC - Declaration of Conformity
Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
retailer:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
hereby declares that the following product,
Type of machine: Milling-machine
Type designation: MF2 Vario
Serial number: _ __ __ __ __
Year of manufacture: 20__
Manual milling-machine with frequency converter and digital position display, for craft and industrial plants
which meets all the relevant provisions of the above mentioned Directive 2006/42/EC as well as the other
directives applied (below) including their amendments in force at the time of declaration. The following
other EU Directives have been applied: EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU
The safety objective meet the requirement of EC Directive 2006/42/EC
The following harmonized standards were applied:
EN 13128:2001+A2:2009/AC:2010 Safety of machine tools - Milling machines (including boring machines)
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
EN ISO 14119 Safety of machinery - Interlocking devices associated with guards - Principles for design and
selection
EN 61800-5-1 Adjustable speed electrical power drive systems 2008-04 + correction 2
EN 61800-3:2012-09 Adjustable speed electrical power drive systems + correction 1
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
EN 60204-1:2006/AC: 2010 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
EN ISO 13849 - Safety of machinery - Safety-related parts of control systems
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduc-
tion
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by
upper and lower limbs
Responsible for documentation: Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Address: Dr.-Robert-Pfleger-Str.26D - 96103 Hallstadt
Hallstadt, 2016-03-15
Kilian Stürmer
(CEO, General manager)
To Next Page
Loading...
