Optoma EX615 - Page 84

EX540/EX542/EX612/EX615/EX762EX540I/EX542I/ES523ST/EW533ST
Condential
6-4
2. Process
(1) Select the COM Port which you are
using.
(2) Click "Model".
(3) Select the EDID le (*.ini).
(4) Click "Open".
(5) Key in the Serial Number into the
Barcode blank space.
(6) In "Write Source Select" item, select
"VGA-A" and "VGA-B".
(7) Click "Program".
3. Change the cable to VGA-A
- When the message "Please change the
cable to VGA-A" appears on the screen,
click "OK".
(1)
(2)
(3)
(4)
(5)
(6)
(7)