Oracle Database Appliance X6-2-HA User Manual

Remove a Boot Drive
122 Oracle Database Appliance Service Manual • June 2017
2.
Slide the drive into the drive slot until it is fully seated.
3.
Close the latch to lock the drive in place.
4.
Run the fwupdate command and verify that it lists all the disks under the DISKS
section.
Remove a Boot Drive
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes removing a boot drive from Oracle Database Appliance Version 1.

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English