Oracle Database Appliance X6-2-HA User Manual

Chapter4 • Servicing CRUs That Require Server Node Power Off 77
4
♦♦♦C H A P T E R  4
Servicing CRUs That Require Server Node
Power Off
These sections describe how to service customer-replaceable units (CRUs) for the Oracle
Database Appliance that require you to power off the server node. All of these CRUs are
located on the server nodes.
Note - The servicing of hot-plug components such as the HDDs, SDDs, power supplies, and
fans is described in Chapter3, “Servicing CRUs That Do Not Require System Power Off”.
■
“Servicing Oracle Database Appliance X6-2 Series CRUs” on page 77
■
“Servicing Oracle Database Appliance X3-2/X4-2/X5-2 CRUs” on page 78
■
“Servicing Oracle Database Appliance Version 1 CRUs” on page 79
Servicing Oracle Database Appliance X6-2 Series CRUs
This section describes how to service customer-replaceable units (CRUs) for Oracle Database
Appliance X6-2 series. If you have Oracle Database Appliance X3-2, Oracle Database
Appliance X4-2, or Oracle Database Appliance X5-2, go to “Servicing Oracle Database
Appliance X3-2/X4-2/X5-2 CRUs” on page 78. If you have Oracle Database Appliance
Version 1, go to “Servicing Oracle Database Appliance Version 1 CRUs” on page 79.
Note - When adding DIMMs to the system, refer to the "Optional Component Installation"
section in the Owner's Guide for supported configurations.
This section describes how to service customer-replaceable units (CRUs) that require you to
power off the server.
Note - For the Oracle Database Appliance X6-2-HA, all of the CRUs on the storage
shelf and the storage expansion shelf can be replaced while the power is on. See “Oracle
Database Appliance X3-2/X4-2/X5-2 and X6-2-HA Storage Shelf Hot-Pluggable
Components” on page 57 for storage shelf component replacement procedures.

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English