Oracle Database Appliance X6-2-HA User Manual

Install Battery
158 Oracle Database Appliance Service Manual • June 2017
b.
Twist the battery (either clockwise or counter-clockwise) and lift it out.
Install Battery
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes installing the battery in Oracle Database Appliance Version 1.
1.
Unpack the replacement battery.
2.
Press the new battery into the battery holder with the positive side (+) facing the
server node side wall.
3.
If the service processor is configured to synchronize with a network time server
using the Network Time Protocol (NTP), the Oracle ILOM clock is reset as soon
as the server node is powered on and connected to the network. Otherwise,
proceed to the next step.

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English