Oracle Database Appliance X6-2-HA User Manual

Power On Oracle Database Appliance Version 1
AppendixA • Servicing the Oracle Database Appliance Version 1 211
■
Using the server node's Power button: Momentarily press and release the
recessed Power button on the front panel [1].
On the server node, the green Power/OK LED [2] blinks while the server node is booting,
and remains steady on when the server node is operational.
■
Using the Oracle ILOM web interface:
a.
Open a browser and enter the server node's service processor IP
address in the browser's address field.
b.
At the log in page, type a user name (the account must have Reset and
Host Control (r) privileges) and password, and click the Log In button.
c.
Go to Remote Power Control and select Power On from the Select
Action list box and then click Save and OK.
On the server node, the green Power/OK LED [2] blinks while the server node is
booting, and remains steady on when the server node is operational.
■
Using the Oracle ILOM CLI:
a.
Log in to Oracle ILOM using an ssh client. Type:

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English