Oracle Database Appliance X6-2-HA User Manual

Server Node Basic Input/Output System (BIOS)
AppendixA • Servicing the Oracle Database Appliance Version 1 215
Each Oracle Database Appliance Version 1 power-on-self-test (POST) diagnostic is a low-
level test designed to detect faults in a specific hardware component. If the POST diagnostic
discloses an F1 or F2 error, it typically reports the following information about the error:
■
Type of error detected
■
When or where the error occurred
The following table lists some of the F1 and F2 error messages that could appear during the
POST diagnostics along with instructions for how to possibly resolve the error reported.
BIOS POST Error Message Error Type Resolution
Uncorrectable Error Detected on Last Boot:IOH
(0) Protocol Error (Please Check SP Log for more
Details)
IOH error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
details.
Uncorrectable Error Detected on Last Boot:IOH(0)
QPI [x] Error (Please Check SP Log for more Details)
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
event log in Oracle ILOM for more details.
Note - Where QPI [x] equals 0 for QPI Link 0 or 1 for
QPI Link 1.
Uncorrectable Error Detected on Last Boot:IOH
(0) PCI-E [x] Error (Please Check SP Log for more
Details)
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
event log in Oracle ILOM for more details.
Note - Where PCI-E [x] port number can range from
1 to 10 depending on the PCI root port on IOH.
Uncorrectable Error Detected on Last Boot:IOH(0)
ESI Error (Please Check SP Log for more Details)
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
event log in Oracle ILOM for more details.
Uncorrectable Error Detected on Last Boot:IOH
(0) Thermal Error (Please Check SP Log for more
Details)
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
event log in Oracle ILOM for more details.
Uncorrectable Error Detected on Last Boot:IOH(0)
DMA Error (Please Check SP Log for more Details)
IOH error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
details.
Uncorrectable Error Detected on Last Boot:IOH(0)
Miscellaneous Error (Please Check SP Log for more
Details)
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
event log in Oracle ILOM for more details.
Uncorrectable Error Detected on Last Boot:IOH(0)
VTd Error (Please Check SP Log for more Details)
IOH error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
details.
BMC Not Responding Oracle ILOM error ■ Press F1 to continue.
Note - This error message might display if during
the SP/BIOS communication an internal error occurs.
This error might require you to restart the SP.
■ Primary Slave Hard Disk Error
■ Primary Master Hard Disk Error
IDE/ATAPI error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
details.

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English