Rackmount Kit Contents
Caution - Do not use slide rail mounted equipment as a shelf or a work space.
Caution - The server weighs approximately 43 lb (19.5 kg). Two people are required to lift and
mount this server into a rack enclosure when using the procedures in this document.
Related Information
■
“Physical Specifications” on page 15
■
“Handling Precautions” on page 22
■
“Stabilize the Rack” on page 29
Rackmount Kit Contents
The rackmount kit contains two slide-rails, two mounting brackets, and optional securing
screws.
Note - Refer to the rackmount kit installation card for instructions on how to install your server
into a four-post rack, using the slide-rail and cable management arm options.
28 SPARC S7-2 Server Installation Guide • July 2016
To Next Page
Loading...
