Rear Panel Components (Installation)
No. Description No. Description
4 Service Action Required LED
(amber)
13 Drive 2 (HDD/SDD) or NVMe 0
5 Power/OK LED (green) 14 Drive 3 (HDD/SDD) or NVMe 1
6 Power button 15 Drive 4 (HDD/SDD) or NVMe 2
7 SP OK/Fault LED (green or
amber)
16 Drive 5 (HDD/SDD) or NVMe 3
8 Fan Service Action Required LED
(amber)
17 Drive 6 (HDD/SDD)
9 PS Service Action Required LED
(amber)
18 Drive 7 (HDD/SDD)
Related Information
■
“Server Overview” on page 11
■
“Rear Panel Components (Installation)” on page 13
Rear Panel Components (Installation)
Note - You must follow the proper sequence when connecting cables to the server. Do not
connect the power cords until all data cables have been connected.
No. Description No. Description
1 Power supply 0 Fault LED 8 NET 0 100/1000/10000 port
2 Power supply 0 OK LED 9 NET 1 100/1000/10000 port
Understanding the Server 13
To Next Page
Loading...
