Oracle SPARC S7-2 Installation Guide

Assign a Static IP Address to the NET MGT Port
-> set /SP/network commitpending=true
Set 'commitpending' to 'true'
Note - You can type the show /SP/network command again to verify that the parameters have
been updated.
7.
Set the static IP address when you configure the Oracle Solaris OS.
See “Configure the Preinstalled Oracle Solaris OS” on page 60.
Related Information
■
Server Administration
■
“Configure the Preinstalled Oracle Solaris OS” on page 60
■
“Reach a State to Install a Fresh OS (Oracle ILOM CLI)” on page 61
■
“Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)” on page 63
■
Oracle ILOM documentation
Powering On the Server for the First Time 69

Oracle SPARC S7-2 Specifications

General

Brand	Oracle
Model	SPARC S7-2
Category	Server
Language	English