Oracle ZFS Storage DE3-24P User Manual

1
Installation Overview
This guide describes installation procedures for Oracle ZFS Storage Appliance.
Each controller should have at least one NIC port configured as a management interface. If
necessary, install additional NIC card(s) into the appropriate PCIe slot(s) before initial
controller installation. For information on installing a PCIe card, see the appropriate section
for your controller in the Oracle ZFS Storage Appliance Customer Service Manual, Release
OS8.8.x.
Follow these steps to install your appliance:
1. Read Prerequisites for Installation.
2. Review the information about your disk shelves and controllers in Installation
Prerequisites and Hardware Overviews.
3. Install your disk shelves using the appropriate procedure in Installing Disk Shelves.
4. Install your controllers:
• Installing an Oracle ZFS Storage ZS9-2 Controller
• Installing an Oracle ZFS Storage ZS7-2 Controller
• Installing an Oracle ZFS Storage ZS5-4 Controller
• Installing an Oracle ZFS Storage ZS5-2 Controller
• Installing an Oracle ZFS Storage ZS4-4 or Oracle ZFS Storage ZS3-4 Controller
• Installing an Oracle ZFS Storage ZS3-2 Controller
• Installing a Sun ZFS Storage 7x20 Controller
5. Cable the appliance as described in Getting Started with Cabling in Oracle ZFS Storage
Appliance Cabling Guide, Release OS8.8.x.
For the maximum number of disk shelves supported per controller configuration, see
Maximum Disk Shelves per Controller Configuration.
6. Power on your appliance using the procedures in Powering On the Appliance.
7. Complete first-time configuration and prepare the appliance for production using the
procedures in Configuring the Appliance for the First Time.
For information about troubleshooting hardware faults using Oracle Integrated Lights Out
Manager (ILOM), see Troubleshooting Hardware Faults.
1-1

Oracle ZFS Storage DE3-24P Specifications

General

Brand	Oracle
Model	ZFS Storage DE3-24P
Category	Storage device
Language	English