IGS-3032GC User’s Manual
22
The following table describes the labels in this screen.
Label Description
DHCP Client
To enable or disable the DHCP client function. When DHCP client
function is enabling, the switch will be assigned the IP address from
the network DHCP server. The default IP address will be replaced by
the IP address which the DHCP server has assigned. After clicking
“Apply” button, a popup dialog show up up to inform the you when the
DHCP client is enabling. The current IP will lose and you should find
a new IP on the DHCP server.
IP Address
Assign the IP address that the network is using. If DHCP client
function is enabling, you do not need to assign the IP address. The
network DHCP server will assign the IP address for the switch and it
will be display in this column. The default IP is 192.168.10.1
Subnet Mask
Assign the subnet mask of the IP address. If DHCP client function is
enabling, you do not need to assign the subnet mask
Gateway
Assign the network gateway for the switch. The default gateway is
192.168.10.254
DNS1
Assign the primary DNS IP address
DNS2
Assign the secondary DNS IP address
Apply
Click “Apply” to set the configurations.
To Next Page
Loading...
