ORiNG IGS-3032GC - Command Line Interface (CLI) Management; CLI Configuration Introduction; CLI Management Methods

IGS-3032GC User’s Manual
72
5.1.13 Save Configuration
If any configuration changed, “Save Configuration” should be clicked to save current
configuration data to the permanent flash memory. Otherwise, the current configuration will
be lost when power off or system reset.
System Configuration interface
The following table describes the labels in this screen.
Label Description
Save
Save all configurations.
Help
Show help file.
5.1.14 Factory Default
Factory Default interface
Reset switch to default configuration. Click
Reset
to reset all configurations to the default
value. You can select “Keep current IP address setting” and “Keep current username &
password” to keep current IP and username and password.
5.1.15 System Reboot
System Reboot interface