ORiNG IGS-3032GC - Port Access Security; MAC Address Blacklisting

IGS-3032GC User’s Manual
58
IP Security interface
The following table describes the labels in this screen.
Label Description
IP security MODE
Enable/Disable the IP security function.
Enable WEB
Management
Mark the blank to enable WEB Management.
Enable Telnet
Management
Mark the blank to enable Telnet Management.
Enable SNMP
Management
Mark the blank to enable MPSN Management.
Apply
Click “Apply” to set the configurations.
Help
Show help file.
5.1.10.2 Port Security
Port security is to add static MAC addresses to hardware forwarding database. If port
security is enabled at Port Control page, only the frames with MAC addresses in this list will
be forwarded, otherwise will be discarded.