ORiNG IGS-3032GC - Commands Set List-System Commands Set

IGS-3032GC User’s Manual
78
Symbol of Command Level.
Mode Symbol of Command Level
User EXEC
E
Privileged EXEC
P
Global configuration
G
VLAN database
V
Interface configuration
I
6.2 Commands Set List—System Commands Set
IGS-3032GC Commands Level Description Example
show config E
Show switch
configuration
switch>show config
show terminal P
Show console
information
switch#show terminal
menu E
Enter MENU mode switch>menu
write memory P
Save your
configuration into
permanent memory
(flash rom)
switch#write memory
system name
[System Name]
G
Configure system
name
switch(config)#system name xxx
system location
[System Location]
G
Set switch system
location string
switch(config)#system location xxx
system description
[System Description]
G
Set switch system
description string
switch(config)#system description
xxx
system contact
[System Contact]
G
Set switch system
contact window string
switch(config)#system contact xxx
show system-info E
Show system
information
switch>show system-info
ip address
[Ip-address]
[Subnet-mask]
[Gateway]
G
Configure the IP
address of switch
switch(config)#ip address
192.168.1.1 255.255.255.0
192.168.1.254