ORiNG IGS-3032GC - QoS Commands Reference

IGS-3032GC User’s Manual
89
Auto
stp-admin-edge
[True|False]
I
Admin Edge of STP
priority on this
interface.
switch(config)#interface fastEthernet
2
switch(config-if)# stp-admin-edge
True
stp-admin-non-stp
[True|False]
I
Admin NonSTP of
STP priority on this
interface.
switch(config)#interface fastEthernet
2
switch(config-if)# stp-admin-non-stp
False
Show spanning-tree E
Display a summary of
the spanning-tree
states.
switch>show spanning-tree
no spanning-tree G
Disable spanning-tree. switch(config)#no spanning-tree
6.7 Commands Set List—QoS command set
IGS-3032GC Commands Level Description Example
qos policy
[weighted-fair|strict]
G
Select QOS
policy
scheduling
switch(config)#qos
policy weighted-fair
qos prioritytype
[port-based|cos-only|tos-only|cos-first|tos-first]
G
Setting of
QOS priority
type
switch(config)#qos
prioritytype
qos priority portbased
[Port] [lowest|low|middle|high]
G
Configure
Port-based
Priority
switch(config)#qos
priority portbased 1
low
qos priority cos
[Priority][lowest|low|middle|high]
G
Configure
COS Priority
switch(config)#qos
priority cos 22 middle
qos priority tos
[Priority][lowest|low|middle|high]
G
Configure
TOS Priority
switch(config)#qos
priority tos 3 high
show qos P
Display the
information
of QoS
configuration
switch>show qos
no qos G
Disable QoS
function
switch(config)#no qos