IGS-3032GC User’s Manual
32
5.1.4.4 Rate Limit
By this function, You can limit traffic of all ports, including broadcast, multicast and flooded
unicast. You can also set “Ingress” or “Egress” to limit traffic received or transmitted
bandwidth.
Rate Limit interface
The following table describes the labels in this screen.
Label Description
Ingress Limit Frame Type
You can set “all”, “Broadcast only”, ”Broadcast/Multicast”
or ”Broadcast/Multicast/Flooded Unicast” mode.
Ingress
The switch port received traffic.
Egress
The switch port transmitted traffic.
Apply
Click “Apply” to set the configurations.
To Next Page
Loading...
