ORiNG IGS-3032GC - Commands Set List-IGMP Command Set; Commands Set List-Mac;Filter Table Command Set

IGS-3032GC User’s Manual
90
6.8 Commands Set List—IGMP command set
IGS-3032GC Commands Level Description Example
igmp enable G
Enable IGMP
snooping function
switch(config)#igmp enable
Igmp-query auto G
Set IGMP query to
auto mode
switch(config)#Igmp-query auto
Igmp-query force G
Set IGMP query to
force mode
switch(config)#Igmp-query force
show igmp configuration P
Displays the details of
an IGMP
configuration.
switch#show igmp configuration
show igmp multi P
Displays the details of
an IGMP snooping
entries.
switch#show igmp multi
no igmp G
Disable IGMP
snooping function
switch(config)#no igmp
no igmp-query G
Disable IGMP query switch#no igmp-query
6.9 Commands Set List—MAC/Filter Table command set
IGS-3032GC Commands Level Description Example
mac-address-table static
hwaddr
[MAC]
I
Configure MAC
address table of
interface (static).
switch(config)#interface fastEthernet
2
switch(config-if)#mac-address-table
static hwaddr 000012345678
mac-address-table filter
hwaddr
[MAC]
G
Configure MAC
address table(filter)
switch(config)#mac-address-table
filter hwaddr 000012348678
show mac-address-table P
Show all MAC
address table
switch#show mac-address-table
show mac-address-table
static
P
Show static MAC
address table
switch#show mac-address-table
static
show mac-address-table
filter
P
Show filter MAC
address table.
switch#show mac-address-table filter
no mac-address-table
static hwaddr
[MAC]
I
Remove an entry of
MAC address table of
interface (static)
switch(config)#interface fastEthernet
2
switch(config-if)#no
mac-address-table static hwaddr