ORiNG IGS-3032GC - Commands Set List-TFTP Command Set; Commands Set List-SYSLOG, SMTP, EVENT Command Set

IGS-3032GC User’s Manual
95
6.13 Commands Set List—TFTP command set
IGS-3032GC Commands Level Description
Defaults
Example
backup
flash:backup_cfg
G
Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file
name of image.
switch(config)#backup
flash:backup_cfg
restore flash:restore_cfg G
Get configuration from
TFTP server and need
to specify the IP of
TFTP server and the
file name of image.
switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G
Upgrade firmware by
TFTP and need to
specify the IP of TFTP
server and the file
name of image.
switch(config)#upgrade
lash:upgrade_fw
6.14 Commands Set List—SYSLOG, SMTP, EVENT command
set
IGS-3032GC Commands Level Description Example
systemlog ip
[IP address]
G
Set System log
server IP address.
switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both]
G
Specified the log
mode
switch(config)# systemlog mode
both
show systemlog E
Display system log. Switch>show systemlog
show systemlog P
Show system log
client & server
information
switch#show systemlog
no systemlog G
Disable systemlog
functon
switch(config)#no systemlog
smtp enable G
Enable SMTP
function
switch(config)#smtp enable
smtp serverip G
Configure SMTP switch(config)#smtp serverip