To Next PageTo Next Page
Need help?Do you have a question about the ORiNG IGS-3032GC and is the answer not in the manual?
Lists the key software functionalities and technologies supported by the switch.
Details the physical specifications and components of the switch hardware.
Instructions for mounting the switch onto a DIN rail using the provided kit.
Procedures for installing the switch on a wall using a wall mount panel.
Overview of how to configure the switch using a web browser interface.
Describes the web interface, its features, and browser compatibility.
Covers fundamental switch configurations like system name, description, and location.
Procedures for changing the administrator username and password for security.
Configuration options for the switch's IP address, subnet mask, and gateway.
Saving and loading switch configurations to/from a TFTP server.
Process for updating the switch's firmware image using a TFTP server.
Configuring the switch to act as a DHCP server for network devices.
Configuring network redundancy features for high availability.
Details the proprietary O-Ring technology for fast network ring recovery.
Understanding Virtual LANs and how to configure them on the switch.
Setting up VLANs using the IEEE 802.1Q tagged-based standard.
Simple Network Management Protocol configuration for network monitoring and management.
Configuring Quality of Service (QoS) to prioritize network traffic.
Overview of security features to enhance switch protection.
Restricting switch management access based on IP addresses.
Securing ports by allowing only specific MAC addresses to access them.
Configuration of IEEE 802.1X for port-based network access control and authentication.
Tools for monitoring switch performance and diagnosing issues.
Saving current switch configurations to non-volatile memory.
Resetting the switch to its default factory settings.
Introduction to managing the switch using a command-line interface.
Lists the key software functionalities and technologies supported by the switch.
Details the physical specifications and components of the switch hardware.
Instructions for mounting the switch onto a DIN rail using the provided kit.
Procedures for installing the switch on a wall using a wall mount panel.
Overview of how to configure the switch using a web browser interface.
Describes the web interface, its features, and browser compatibility.
Covers fundamental switch configurations like system name, description, and location.
Procedures for changing the administrator username and password for security.
Configuration options for the switch's IP address, subnet mask, and gateway.
Saving and loading switch configurations to/from a TFTP server.
Process for updating the switch's firmware image using a TFTP server.
Configuring the switch to act as a DHCP server for network devices.
Configuring network redundancy features for high availability.
Details the proprietary O-Ring technology for fast network ring recovery.
Understanding Virtual LANs and how to configure them on the switch.
Setting up VLANs using the IEEE 802.1Q tagged-based standard.
Simple Network Management Protocol configuration for network monitoring and management.
Configuring Quality of Service (QoS) to prioritize network traffic.
Overview of security features to enhance switch protection.
Restricting switch management access based on IP addresses.
Securing ports by allowing only specific MAC addresses to access them.
Configuration of IEEE 802.1X for port-based network access control and authentication.
Tools for monitoring switch performance and diagnosing issues.
Saving current switch configurations to non-volatile memory.
Resetting the switch to its default factory settings.
Introduction to managing the switch using a command-line interface.
General| Brand | ORiNG |
|---|---|
| Model | IGS-3032GC |
| Category | Network Router |
| Language | English |
