IGS-3032GC User’s Manual
77
Commands Level
Modes Access Method Prompt Exit Method About This Model
User EXEC Begin a session
with your switch.
switch>
Enter logout
or quit.
The user command available at
the level of user is the subset of
those available at the privileged
level.
Use this mode to
• Enter menu mode.
• Display system information.
Privileged
EXEC
Enter the enable
command while in
user EXEC mode.
switch#
Enter disable
to exit.
The privileged command is
advance mode
Privileged this mode to
• Display advance function
status
• save configures
Global
configuration
Enter the configure
command while in
privileged EXEC
mode.
switch(conf
ig)#
To exit to
privileged
EXEC mode,
enter exit or
end
Use this mode to configure
parameters that apply to your
Switch as a whole.
VLAN
database
Enter the vlan
database
command while in
privileged
EXEC mode.
switch(vlan
)#
To exit to
user EXEC
mode, enter
exit.
Use this mode to configure
VLAN-specific parameters.
Interface
configuration
Enter the interface
command (with a
specific
interface)while in
global configuration
mode
switch(conf
ig-if)#
To exit to
global
configuration
mode,
enter exit.
To exist
privileged
EXEC mode
or end.
Use this mode to configure
parameters for the switch and
Ethernet ports.
To Next Page
Loading...
