IGS-3032GC User’s Manual
76
CLI Management by Telnet.
Users can use telnet to configure the switches.
The default value is as below:
IP Address: 192.168.10.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.10.254
User Name: admin
Password: admin
Follow the steps below to access the console via Telnet.
(1) Telnet to the IP address of the switch from the Windows “Run“ command (or from the
MS-DOS prompt).
(2) The Console login screen will appear. Use the keyboard enter the Console Username
and Password that is same as the Web Browser password), and then press “Enter”
To Next Page
Loading...
