ORiNG IGS-3032GC - Page 82

IGS-3032GC User’s Manual
81
Fast
Ethernet.
speed
[10|100|1000|auto]
I
Use the
speed
configuratio
n command
to specify
the speed
mode of
operation for
Fast
Ethernet.,
the speed
can’t be set
to 1000 if
the port isn’t
a giga port..
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100
flowcontrol mode
[Symmetric|Asymmetric]
I
Use the
flowcontrol
configuratio
n command
on Ethernet
ports to
control
traffic rates
during
congestion.
switch(config)#interface
fastEthernet 2
switch(config-if)#flowcontrol mode
Asymmetric
no flowcontrol I
Disable flow
control of
interface
switch(config-if)#no flowcontrol
security enable I
Enable
security of
interface
switch(config)#interface
fastEthernet 2
switch(config-if)#security enable
no security I
Disable
security of
switch(config)#interface
fastEthernet 2