User’s Guide 33
Example:
CM>image upgrade 1
Downloading ram.compress from 172.146.1.177
..................
Download file size=596407
Board ID is U10C005.00.01_JP01
Compatible list is U10C005.00.01_US01
Match compatible list
Update image 1...
Reboot Cable Modem...
¾ image use {1|2}
Activate and boot with the firmware stored in “image 1” or “image 2”.
Ping
¾ ping {IP address} [-t]
Ping specified IP address. When [–t] parameter is specified, continually ping until Ctrl-C or Ctrl-Z
is pressed. The Ctrl-C key ceases ping and display summery results of ping test. The Ctrl-Z key
pauses ping test and display summery results collect from the beginning of ping test.
Example:
CM>ping 92.146.1.254 -t
Pinging 92.146.1.254 with 64 bytes of data:
Reply from 92.146.1.254: bytes=64 time=10ms TTL=255 seq=0
Reply from 92.146.1.254: bytes=64 time=10ms TTL=255 seq=1
Reply from 92.146.1.254: bytes=64 time=10ms TTL=255 seq=2
Reply from 92.146.1.254: bytes=64 time=10ms TTL=255 seq=3
Reply from 92.146.1.254: bytes=64 time=20ms TTL=255 seq=4
Reply from 92.146.1.254: bytes=64 time=10ms TTL=255 seq=5
Control-C Pressed...
Ping statistics:
Packets sent: 6; received: 6; Lost: 0 (0% loss)
Round trip time in milli-seconds:
Minimum time: 0ms; Maximum time: 20ms; Average time: 11ms
Tracert
¾ tracert {IP address} hops {1..50}
Find route based on IP address with maximum number of hops specify.
Example:
CM>tracert 66.218.71.198 hops 50
Tracing route to 66.218.71.198 over a maximum of 50 hops
1 10ms 10ms 10ms 10.46.1.254
To Next Page
Loading...
General