User’s Guide 13
Installing the Software Drivers
This section explains how to install the software drivers that your PC requires for the cable
modem to operate.
Installing the Software Drivers in Windows 98 SE Operating System
CAUTION: You must install the drivers located on the CD that ships with your cable
modem. If you use the default Windows-supplied software drivers, you will not be able
to properly install the cable modem.
To install the cable modem software drivers using the Windows 98 operating system:
1. Power on your PC. After your computer boots, Windows detects the cable modem.
The Found New Hardware screen appears, followed by the Add New Hardware
Wizard screen.
2. Insert the CD into the PC’s CD-ROM drive and click Next. You will see the
following screen:
To Next Page
Loading...
General