Orion 3000 - Nvram; Tftp; Host-Name

User’s Guide 41
Display access list information
Example:
CM>show access-list
Access List
ID Control Address
41 Permit 00D0.5900.0000, hardware address mask FFFF.FF00.0000
42 Permit 0008.0E00.0000, hardware address mask FFFF.FF00.0000
1 Permit 192.168.100.0, wildcard bits 0.0.0.16
21 Permit 64.168.39.0, wildcard bits 0.0.0.8
¾ show cpe-limit
Display CPE limit information
Example:
CM>show cpe-limit
MAC address limit: unlimited
IP address limit: unlimited
¾ show pppoe-forwarding
Show PPPoE forwarding function status
Example:
CM>show pppoe-forwarding
PPPoE forwarding disable.
NVRAM
¾ nvram factory-default
Restore cable modem to factory default.
TFTP
¾ tftp filename {file name}
Set the file name of the firmware image to download.
¾ tftp server { IP address }
Set TFTP server IP address..
Host-name
¾ host-name set { name} max 64 characters
Set host name for the cable modem. It will change the command prompt to the host-name.