Orion 3000 - Block Ports

User’s Guide 68
Block Ports
Port Blocking
You can enable/disable port blocking with specified application service port number by
selecting “Enable port block”.
Port
Enter specific application service port number.
Traffic
You can select traffic blocking based on incoming, outgoing, or both directions.
• Add Port – Add application service port and traffic directions into the “Port Blocking Table”
• Delete – Select the application service port from the “Port Blocking Table” and click
“Delete” to remove the blocking from the “Port Blocking Table”
• Delete all – Click “Delete all” to empty the “Port Blocking Table”
Submit
• Any configuration changes must be followed by “Submit” before changes will occur.
Cancel
• Any configuration changes will be restored.