To Next Page

To Previous Page

User’s Guide 42

Example:

CM>host-name set Customer1

Set host-name to"Customer1”

Customer1>

¾ host-name delete

Delete host-name. It will change the command prompt to CM>.

¾ tftp server {Server IP address}

Establishes the IP address of the TFTP server for firmware download

Example:

CM>tftp server 92.146.1.250

Set TFTP Server to 92.146.1.250

DHCP

¾ dhcp {enable/disable}

Enable/disable dhcp server

¾ dhcp ip-pool add {start IP} {end ip}

Set dhcp server ip pool range

Example:

CM> dhcp ip-pool add 192.168.100.2 192.168.100.4

CM>show dhcp

TFTP Server IP address : 172.19.89.19

Cable Modem IP address : 10.71.135.99

Configuration file : DEF001.cfg

Lease time : 86400 (secs)

UTC time offset : -28800 (secs)

SystemLog Server IP address : 172.19.89.19

Router IP address : 10.71.128.1

SubnetMask : 255.255.240.0

DHCP server enable

NAT DHCP Server Pool Table :

NAT DHCP server support 20 IP pools

NAT DHCP server support 512 IP, Created 3 IP

Pool Index Begin IP End IP

1 192.168.100.2 192.168.100.4

Provision assigned DNS 68.4.16.30

Provision assigned DNS 68.6.16.30

DHCP server lease time : 1800

Orion 3000 User Manual

Questions and Answers: