Need help?Do you have a question about the OSS EB16-Basic and is the answer not in the manual?
Explains different advisory types used in the manual.
Covers warnings, cautions, and ESD protection for safe operation.
Details the ExpressBox 16 Basic system and its configurations.
Lists the key functionalities and benefits of the system.
Provides detailed technical data including dimensions, power, and environmental specs.
Identifies and illustrates the key hardware parts of the system.
Outlines preparation steps and lists included items for installation.
Specifies the necessary tools for setting up the expansion system.
Provides essential safety and procedural instructions before installation.
Describes steps to open the chassis and remove the card holder assembly.
Details the process of inserting PCIe add-in cards into the chassis.
Guides on how to install the host card into the computer.
Explains choosing the correct slot and setting dipswitches for host mode.
Details setting dipswitches for the expansion mode on the interface card.
Covers connecting iPass and power cables for system operation.
Describes the steps to power on the expansion chassis and host computer.
Explains how to confirm successful hardware installation using LEDs.
Guides on verifying installation using Windows Device Manager.
Outlines steps for verifying installation on Mac OS X.
Describes how to verify installation using Linux commands.
Confirms the system is operational after installation and software setup.
Details power limits and requirements for PCIe slots.
Explains the functionality and benefits of the redundant power supply.
Covers LEDs, bandwidth, and lane settings for x16 and x8 interface cards.
Describes the backplane, its block diagram, and key connectors.
Addresses common questions and explains backplane dipswitch functions.
Details power supply connectors, auxiliary power, and cable installations.
Explains the function of various LEDs on the backplane for status monitoring.
Provides instructions on cleaning the expansion chassis to maintain performance.
Details how to replace the hot-swappable fans in the chassis.
Guides on how to replace a power supply module in the event of failure.
Steps to identify and locate issues with the expansion system.
Troubleshooting steps when the OS does not recognize the expansion chassis.
Addresses issues where add-in PCIe cards are not recognized.
Discusses support for third-party cards and common Windows error codes.
Solutions for when the system hangs after installing multiple cards.
Troubleshooting steps for when the system does not function at all.
Information on how to reach OSS technical support for assistance.
Procedures for returning products for service or warranty.
Links to FAQs, documentation, and other online support materials.
Details the equipment's compliance with FCC regulations.
Outlines compliance with Canadian ICES-003 standards.
States compliance with European Union directives.
Information on the company's quality management system.
Details adherence to Restriction of Hazardous Substances directive.
Explains compliance with Waste Electrical and Electronic Equipment directive.
General| Brand | OSS |
|---|---|
| Model | EB16-Basic |
| Category | Computer Hardware |
| Language | English |
To Next Page
