Need help?Do you have a question about the OTARI Status 18R and is the answer not in the manual?
General| Type | Analog Mixing Console |
|---|---|
| EQ Bands per Channel | 4 |
| Aux Sends | 6 |
| Phantom Power | Yes |
| Frame Sizes | 18 |
| Input Channels | 18 |
| Busses | 8 |
| EQ | 4-band |
| Routing | Comprehensive routing |
| Metering | LED |
| Faders | 100mm |
| Dimensions | Varies by frame size |
| Weight | Varies by frame size |
General guidelines for safe operation and maintenance, including warnings about heat, ventilation, and power.
Details for obtaining service information, parts, and technical assistance from Otari.
Mailing address for Otari, Inc. for customer feedback and product registration.
User registration form to help Otari provide better customer support and information.
Details the console's analog and digital features, dual path design, summing, and VCA implementation.
Guidance on navigating the manual, section descriptions, and key terminology.
Technical specifications including electrical, performance, and power supply details.
Physical dimensions and frame lengths for the STATUS 18R console.
Overview of installation, physical precautions, ventilation, and electrical power considerations.
Steps for unpacking the console and inspecting for damage or missing parts.
Guidelines for connecting audio signals, interface connectors, and microphone cables.
Instructions for connecting power supplies, Eagle Automation PC, and optional monitor systems.
Steps for normalizing the console and performing the initial power-up sequence.
General console layout, Digital Master Module, Master Section, and Analog Master Section.
Covers input controls, aux sends, EQ, and path-specific controls for Input Modules.
Details on the master metering section and the console's patchbay.
Description of stereo input module sections including input, aux, EQ, M/S, and fader controls.
Overview of the operation section and detailed descriptions of console components.
Covers getting started, module editing basics, switch states, undo, copying, and selection.
Details presets, soft keys, solo system, aux sends, fader grouping, snapshots, image recall, UPS, and time code.
Covers precautions, minimum PC requirements, and software installation steps.
Details Write/Update buttons, Auto button, and master automation controls via LCD menu.
Describes the Eagle main screen, console window, mix edit, and timeline windows.
Explains switch automation modes, manual/moving fader modes, and how-to guides.
Procedures for removing modules and setting tape input sensitivity.
Detailed steps for calibrating input modules and setting bus output levels.
Covers talkback assignment, VITC termination, AC voltage, module types, and NOVRAM.
Describes the Meter Main Menu options for signal display.
Details Solo Main Menu and various Solo-Options pages for configuring solo behavior.
Covers group setup, creation, viewing, and management functions.
Reference for loading and saving snapshots and console images.
Details nulling status menu and fast switch nulling mode.
Covers OPTS menu for Auto button and Glide settings.
Details Time Code Input and Diagnostics menu options.
Covers introduction to dynamics, and basic concepts of noise gates and compressors.
Details installation procedures and the dynamics controller interface.
Explains gate, compressor/limiter, linking, external keying, presets, file management, and metering.
To Next Page