5.6.12 Punching In Data
The RECORD and PLAY buttons can be used to punch in faders and switches that are
set to Write. You may switch between Record and Play as often as you like while the mix
is running using the REC and PLAY buttons on the LCD Menu or the Eagle display.
NOTE: The Auto Record (AUTREC) function must be Off in order to punch in and out of
Record.
5.6.13 Archiving (Saving) the Mix
The current mix resides in the automation PC’s RAM (Random Access Memory) for fast
access and post-pass processing. To write the current mix to disk and keep it from
being updated, use Archive Mix (ARCH).
A mix can be archived in either of the following ways:
• From the LCD Menu System, press Automation, OPTS, then ARCH.
• On the Eagle Screen, Click the ARCH button.
• From the Eagle Files menu select Save or press CTRL-S on the QWERTY keyboard
Archiving increments the Write Mix number so that the archived mix can no longer be
written to. Future passes will be written to the next highest mix number. The archived
mix can be recalled at any time as the basis for a new mix.
Read, Write, and Original mix numbers are displayed in the Mix Processing window.
Eagle can archive passes automatically if desired. Setting the Auto-Archive number
archives the mix after the specified amount of passes.
To set the Auto Archive number:
1. From the Eagle Edit menu, select Automation Preferences.
2. Click the Mix Options tab to display and set the Auto Archive number.
To Next Page
Loading...
Need help?
General