Section 2 Installation
August 1999
2.1 Introduction .............................................2-1
2.2 Preparation ..............................................2-1
2.2.1 Physical Precautions ..............................2-1
2.2.2 Ventilation Considerations .........................2-1
2.2.3 Electrical Power Considerations. . ..................2-1
2.2.4 Cable ............................................2-2
2.2.5 Cable Routing ....................................2-2
2.2.6 Grounding and Shielding ..........................2-2
2.3 Uncrating................................................2-3
2.4 Inspection ...............................................2-4
2.5 Shipping Bracket Removal and Leg Installation ............2-4
2.6 Interfacing Audio .........................................2-4
2.6.1 Cable Access.....................................2-4
2.6.2 Interface Connectors ..............................2-5
2.6.3 Interfacing Microphone Cables.....................2-5
2.6.4 Interfacing Audio to Consoles
with Patchbays ...................................2-6
2.6.5 Interfacing Audio to Consoles
without Patchbays ...............................2-10
2.6.6 Interfacing Time Code............................2-13
2.7 Connecting Power Supply Cables .......................2-14
2.8 Connecting Eagle Automation ...........................2-14
2.8.1 Automation PC Specifications . . ..................2-14
2.8.2 Console Connection .............................2-14
2.9 Interfacing the Optional PicMix Surround
Monitor System.........................................2-15
2.10 Set-up And Initial Turn-on..............................2-15
2.10.1 Normalizing the Console ........................2-15
2.10.2 Powering the Console ..........................2-16
2.10.3 Monitor System Setup ..........................2-16
To Next Page
Loading...
Need help?
General