Ottobock | 29B600
► Turn the control unit off when it is not required, since
the product may generate electromagnetic fields that
can cause interference with other devices. The product
has been tested according to EMC regulations.
► Notwithstanding compliance with all applicable EMC
directives and standards, the product can be affected
by interference from other electric devices (e.g.,
department store EAS systems) or cause interference
with such devices. If this occurs, move your product
outside the interference range.
Danger during use of public transportation, elevators,
lifting platforms
WARNING
Use of public transportation, elevators, lifting plat
forms
Risk of tipping, collision with persons or objects in the
vicinity
► Always turn the power wheelchair control unit off when
using buses, trains, elevators, or lifting platforms.
► Engage the brake.
Hazards due to defective tyres
CAUTION
Defective tyres
Accidents/falling due to poor traction, reduced braking
force or lack of manoeuvrability
► Maintain sufficient tyre pressure. The correct tyre pres
sure is printed on the casing.
► Ensure that the drive wheels have the same pressure.
► Ensure that the tyres have sufficient tread depth. The
tyres must be changed when the tread depth is less
than 1 mm.
► Avoid parking outside and in direct sunlight (UV radi
ation) since this causes the tyres to age quickly. The
manufacturer recommends replacing the tyres every
2years regardless of the amount of wear.
► Always maintain sufficient clearance from sources of
heat. If the product is parked for an extended period of
time or the tyres overheat (e.g., in the vicinity of radiat
ors or in case of exposure to strong sunlight behind
glass), the tyres may become permanently deformed.
► Move your power wheelchair frequently or have a way
to jack it up for storage.
Usage
To Next Page
Loading...
