Otto Bock B600 - Page 79

Ottobock | 79B600
Component Task Prior to
every use
Weekly Monthly
Check for sufficient tread depth (min. 1 mm) XTyres
Check for damage X
Batteries Check battery charge level X
Check for external damage XLights
Verify functionality X
Check whether the control unit is functioning properly
(inform qualified personnel of any LED error messages)
X
Check whether the battery charger is functioning properly
(inform qualified personnel of any LED error messages)
X
Electronics
Check plug connections X
When brake is disengaged: check whether the LED indicat
or on the control panel is flashing
XBrake
When brake is engaged: check braking function by trying to
push the chair
X
Visually inspect all moving components and cabling for dam
age
XPower seat adjust
ments
Check whether screw connections are tight X
Check whether mounting screws are fastened properly X
Check whether screw connections between the armrest and
the control unit are tight
X
Side panel and arm
rest
Check armrest for damage X
Gas compression
spring or actuator
Visually inspect the piston rod for scratches and oil leaks X
Maintenance/Repair