Power Connection
Outlaw Audio
22
Insert the supplied power cord into the AC input
of the rear panel of the preamp/processor. While
we don’t recommend substituting a di erent
power cord without contacting Outlaw Audio
rst, replacements are available if needed.
CAUTION: Before you plug the power cord into an
AC wall outlet, con rm that all connections to the
Model 976 have been made correctly.
WARNING: Never disconnect the power cord from
the Model 976 while the other end is plugged
into an AC outlet. Doing so may cause an electric
shock. Always connect power by plugging into
the AC outlet last and disconnect by unplugging
from the AC outlet rst.
To Next Page
Loading...
