5.6.1.2 [Trace 1 2 3 4 5]
In the trace measurement, the marker used to activate the traces.
5.6.1.3 [Normal]
One of the marker types, which is used to measure the values of
X (Frequency or Time) or Y (Amplitude) at certain point of the
trace. When selected, a marker will appear with its marker
number such as "1" on the trace.
Key points:
⚫ If no active marker exists currently, a sing frequency marker will
be activated automatically at the center frequency of current
trace.
⚫ You can use the knob or numeric keys to move the marker. The
readouts of the marker will be displayed on the upper right of the
screen.
⚫ The readout resolution of the X-axis corresponds to the span
and sweep points. For higher resolution, add sweep points or
reduce the span.
5.6.1.4 [Delta]
One of the marker types, which is used to measure the delta
values of X (Frequency or Time) and Y (Amplitude) between the
To Next Page
Loading...
