Access the option submenu. TG, EMI, CW can be selected as
option.
5.14.2 [Setting >]
Access the submenu for setting the analyzer, including [LAN >],
[Shutdown], [Language >], [Date/Time >].
5.14.2.1 [LAN >]
Access the submenu for LAN port configuring. The analyzer
supports LAN port connection for data transfer.
1) [IP]
Sets the IP address of the LAN port.
2) [Mask]
Sets the subnet mask parameter.
3) [Gate]
Sets the default gateway address.
4) [DHCP On Off]
One of the setting methods of IP address. The DHCP server
assigns an IP address, subnet mask and gateway to the analyzer
on the basis of the current network status.
5.14.2.2 [Shutdown On Off]
Enable/disable the automatic shutdown function. When this
function is enabled, the spectrometer will automatically shut down
within a customized period of time (time range: 5 minutes to 30
days). You can set the time using the number buttons, knobs, or up
and down buttons.
5.14.2.3 [Language >]
Selects the screen menu language.
5.14.2.4 [Date/Time >]
Sets the date, time, and display format of the analyzer.
⚫ [Date Set]
Set the date for the analyzer. Use the numeric keys to enter the
date. The format is YYYMMDD.
E.g. June 22th, 2012 should be entered as 20120622.
⚫ [Time Set]
Set the time for the analyzer. Use the numeric keys to enter the
To Next Page
Loading...
